Set up AxTraxNG server side for AxTraxNG client remote connection over WAN

Set up AxTraxNG server side for AxTraxNG client remote connection over WAN

AxTraxNG server can be connected from any remote client over a TCP/IP network. 

This guide explains how to set up the AxTraxNG server-side for remote connection over the WAN(WIDW AREA NETWORK) connection. 

Setting Up the Server site for client remote connection.

  1. Make sure that the Server site WAN has a static IPV4 address. 
  2. On AxTraxNG Server site router setup a port forwarding to the server-internal IP address using the AxtraxNG Server port (the default port is 1001) 
  3. Make sure that the server firewall is set to allow incoming communication on the primary and secondary ports. You can use this guide to set up the firewall https://support.rosslaresecurity.com/portal/en/kb/articles/how-to-set-windows-defender-firewall-rule-for-ac-825-and-axtraxng-client
  4. If you don't know the AxTrxNG server site static IP address, you can go to https://www.whatsmyip.org/ to find out.
Once you have set up the AxTraxNG server-side for remote connection please follow this guide to install a remote client https://support.rosslaresecurity.com/portal/en/kb/articles/how-to-install-and-set-axtraxng-remote-client