What is the difference between MD-08 and MD-08B?

MD-08 is a Wiegand to RS-232 converter (aka “Desktop Reader”). You use it to enroll cards from your PC. MD-08B is Reader Programmer and it is used to set the Wiegand output format of MIFARE read-only readers, while setting the input control of the reader to either Buzzer or LED control.

Related Articles
MD-N32 (V.1.2.4) Connecting with AxTraxNG version 27.5.6.6 and earlier (AC-215IP/225IP/425IP)
Please note that this Technical-note only refer to AxTraxNG verison 27.5.6.6 while using an Access Control Panel equipped with MD-N32 (V 1.2.4) Summary: Since Rosslare Release Access control IP panels provided with MD-N32 version 1.2.4 those Control ...
Cannot find Access Control panel on TCP/IP (AC-225IP/215IP/425IP and "B")
if you are using an earlier version of AxTraxNG (version 27,5,7.7 and below) and you are trying to add a new access control panel manufactured after 10/2018 please note that Rosslare has updated the IP-module on those control panel and those IP ...
How to convert BLE-ID application IDs to Wiegand
Using the BLE-ID application you can create a virtual credencial using your mobile phone and use is as your credential, either using Bluetooth or NFC. You can easily convert the application IDs to a supported wiegand from using a small PC tool called ...
What is the maximum cable length when using the RS-485 protocol between Control panels?
The maximum cable length while using RS-458 communication is 1200 meters from the first panel till the last one. Please note that a 120 Ohms resistor need to be installed on the first and control panel on the RS-485 line in parallel to the RS-485 ...
How to upgrade from AxTrax(AS-525) to AxTraxNG
To upgrade from AxTrax to AxTraxNG: 1. If your version of AxTrax is version 4.25 or higher, skip to Step ‎7. (you can download AxTrax(AS-525) version 4.25 from: http://pc.cd/fnmctalK) 2. Back up the database: a. Click Tools > ...