I would like to add more than one Access Control panel on the same network. What do I need to do?

• Related Articles

• How to connect an Access Control Panel over WAN.

  AxTraxNG supports connecting any Access Control panel over any network type as long as the panel is accessible via IP address and in the case of AC-825 also AxTraxNG server must be accessible via IP address, This article will explain the connection ...

• Cannot find Access Control panel on TCP/IP (AC-225IP/215IP/425IP and "B")

  if you are using an earlier version of AxTraxNG (version 27,5,7.7 and below) and you are trying to add a new access control panel manufactured after 10/2018 please note that Rosslare has updated the IP-module on those control panel and those IP ...

• How to use AxTraxPro on a machine with more than 1 Network adapters.

  AxTraxPro server service use .NET network structure, AxTraxPro cannot determent which network adapter to use and a network adapter will automatically be assigned to the highest priority adapter on the machine in case of more than 1 network adapters ...

• Can I recover AxTraxNG database from Access Control panel

  In case where AxTraxNG server is lost and no backup of the database is available there is no way to recover data from the Access Control Panels. The data being saved inside the Access Control Panels is saved in a way that have no meaning if restored ...

• LPR cameras Connected directly to Rosslare’s Access Control Panels

  General  Rosslare allows the connection of an LPR (License Plate Recognition) camera directly to its access control panels, without the need for the mediation of a video management software such as VITRAX.  The connection is made directly to an ...