How to set Windows Defender Firewall rule for AC-825IP and AxTraxPro client

When using AC-825IP panel or when a remote client connection is needed there is a need to allows communication coming on to AxTraxPro Server on the PC Firewall, this article will explain you how to set Firewall rules on  Windows Defender. 

This article only refer to Windows Defender Firewall setting, in case other Firewall is being use please refer to the Firewall documentation for the setting process.

1. Open control panel and select System and Security,  Windows Defender Firewall: 
   
2. Select “Advanced Settings” on the left:
   
3. Select Inbound Rules:
   
4. Select New Rule:
   
5. Select Program and click next :
   
6. Under This program Path Insert “C:\Program Files (x86)\Rosslare\AxtraxPro Server\AxtraxService.exe” and click Next:
   
   
7. Select Allow the Connection and click next:
   
8. Select all profiles and click next: 
   
9. Enter “AxtraxPro” for the name and click Finish:
   
   

Now your System is setup for inbound communication from AxTraxNG remotes clients and AC-825IP control panels 

• Related Articles

• How to set Windows Defender Firewall rule for AC-825IP and AxTraxNG client

  When using AC-825IP panel or when a remote client connection is needed there is a need to allows communication coming on to AxTraxNG on the PC Firewall, this article will explain you how to set Firewall rules on  Windows Defender.  This article only ...

• Set up AxTraxNG server side for AxTraxNG client remote connection over WAN

  AxTraxNG server can be connected from any remote client over a TCP/IP network.  This guide explains how to set up the AxTraxNG server-side for remote connection over the WAN(WIDW AREA NETWORK) connection.  Setting Up the Server site for client remote ...

• How to upgrade from AxTraxNG to AxTraxPro

  This technical note gives the procedure to upgrade from AxTraxNG™ v27.7.1.18 or above to AxTraxPro™ v28.0.x.x. Upgrade to AxTraxPro is only available from AxTraxNG version 27.7.1.18 and above, if your version of AxTraxNG lower then AxTraxNG version ...

• How to install and set AxTraxNG remote client

  When a remote AxTraxNG client connection is need to AxTraxNG server you can achieve this in few simple steps: Please note that AxTraxNG server and AxTraxNG client Must use the same version Please set the firewall rules on AxTraxNG server Machine ...

• How to configure AxTraxPro Web Client for remote access

  The Rosslare AxTraxPro™ Web Client software is a web-based software management system intended for the ongoing management of the AxTraxPro™ Server. Operators can access the system from a web browsers for daily tasks. The AxTraxPro access control ...