How to install and set AxTraxPro remote client

When a remote AxTraxPro client connection is needed to AxTraxPro server you can achieve this in few simple steps:

Please note that AxTraxPro server and AxTraxPro client Must use the same version

Please set the firewall rules on AxTraxPro server Machine before installing AxTraxPro remote client, you can use the following article for this: How to set Windows Defender Firewall rule for AC-825IP and AxTraxNG client

1. On the client machine run the AxTraxPro installer.
   
2. Mark the "I Agree" checkbox and Select AxTraxPro Client:
   
   
3. Click Start.
4. Accept AxTraxPro SOFTWARE LICENSE AGREEMENT and click OK:
   
   
5. Follow the installation steps till AxTraxPro client and AxTraxPro configuration tool is done:
   
6. Click OK and close AxTraxPro installer.
   
7. Run the AxTraxPro Configuration Tool as "Administrator" 
   
   
8. From the side menu select Client and,  under Server Services set the AxTraxPro Server IP Address and port (the default port is 1001):
   
   
9. Click save button and close AxTraxPro Configuration Tool:
   
   
10. Now you can run the AxTraxPro Client and use you credentials to login.

• Related Articles

• Set up AxTraxNG server side for AxTraxNG client remote connection over WAN

  AxTraxNG server can be connected from any remote client over a TCP/IP network.  This guide explains how to set up the AxTraxNG server-side for remote connection over the WAN(WIDW AREA NETWORK) connection.  Setting Up the Server site for client remote ...

• How to configure AxTraxPro Web Client for remote access

  The Rosslare AxTraxPro™ Web Client software is a web-based software management system intended for the ongoing management of the AxTraxPro™ Server. Operators can access the system from a web browsers for daily tasks. The AxTraxPro access control ...

• Install AxTraxNG\ AxTraxPro on Windows 11 OS

  Lately there are multiple report on SQL server fails to be installed on Windows 11 OS, following the information provided by Microsoft the most common issue for this failure is system disk sector size greater than 4 KB. in any case of installing ...

• How to set Windows Defender Firewall rule for AC-825IP and AxTraxPro client

  When using AC-825IP panel or when a remote client connection is needed there is a need to allows communication coming on to AxTraxPro Server on the PC Firewall, this article will explain you how to set Firewall rules on Windows Defender. This article ...

• How to connect AxTraxPro server to remote SQL server

  Before starting this process please make sure that the SQL server meets AxTraxPro server supported SQL servers. Which versions of SQL Server does AxTraxPro support? Preparing for Remote SQL connection: To connect the AxTraxPro server to a remote SQL ...