Fix AxTraxNG Client Display layout scale

When AxTraxNG Client installed on a system where the Display scale is set to above 100% the AxTraxNG layout will have an overlay text and tables:

to fix this please follow those steps: 

1. close AxTraxNg client
   
2. Right click on the AxtraxNG client shortcut on the desktop and select “Properties” then “Compatibility”:
   
3. On the Compatibility tab select “Change high DPI settings:
   
4. On the high DPI tab check the box “Override high DPI scaling behavior” then in the pull down below it change to “System”:
   
5. Open AxTraxNG client: 
   
   

• Related Articles

• AxTraxNG client shutdown Automatically

  On AxTraxNG version 27.7.1.9 and higher version a new  auto logout feature was presented.  By default Administrator operator will have 10 min of no action on AxTraxNG client before auto logout, all other operators have no timeout. For Administrator ...

• AxTraxNG client fails to capture a user image using webcam

  This Technical Note only applies to AxTraxNG version 27.7.1.18 Summary Recently a few cases have been reported that trying to capture a user image fails with an error The Solution A patch that includes a new Client.exe file and additional required ...

• Set up AxTraxNG server side for AxTraxNG client remote connection over WAN

  AxTraxNG server can be connected from any remote client over a TCP/IP network.  This guide explains how to set up the AxTraxNG server-side for remote connection over the WAN(WIDW AREA NETWORK) connection.  Setting Up the Server site for client remote ...

• How to install and set AxTraxPro remote client

  When a remote AxTraxPro client connection is needed to AxTraxPro server you can achieve this in few simple steps: Please note that AxTraxPro server and AxTraxPro client Must use the same version Please set the firewall rules on AxTraxPro server ...

• How to upgrade from AxTraxNG to AxTraxPro

  This technical note gives the procedure to upgrade from AxTraxNG™ v27.7.1.18 or above to AxTraxPro™ v28.0.x.x. Upgrade to AxTraxPro is only available from AxTraxNG version 27.7.1.18 and above, if your version of AxTraxNG lower then AxTraxNG version ...