Fire Alarm AC-link

To set a Fire alarm auto doors release and re-lock on AxTraxNG you need to:

1. Add an "Output Group", from the tree view select Groups, Output Groups and add new.
   
2. Select the Doors you wish to release in case of Fire and click OK:
   
3. From the tree view select Networks, selected network, selected control panel where the Fire Alarm input is connected (At least one of this control panel doors must be part of the output group), AC-Links. 

(At least one of this control panel doors must be part of the output group)

1. Add a similar AC-Link:
   

A REX input cannot be use as an activator for such AC-link

Please note that the "Follow" operation will be set automatically after selecting the "Open all outputs of selected output group"  if your input is a normally open input please select "Follow Negative" Operation!

Please note when a selected  Output group that include doors from more than one Access Control Panel and "Open all outputs of selected output group" option is selected AxTraxNG server must be online to activate all outputs in selected output group.

• Related Articles

• What is "Configuration Mode" on AC-825

  A Configuration mode is a special mode of AC-825 Access control panel that come to reduce data sync time and making sure any update on AC-825 will be effected immediately (as long as the server and AC-825 panel are online).  When any configuration is ...

• AC-825IP control panel bootloader version 2.0 support for AxTraxNG version 27.5.7.16

  This Technical Note only apply to AxTraxNG version 27.5.7.16 Summary: Recently Rosslare has upgraded AC-825IP control panel bootloader to version 2.0 to provide better functionality and prepare it for upcoming firmware upgrades. That was a necessary ...

• How to set Windows Defender Firewall rule for AC-825IP and AxTraxNG client

  When using AC-825IP panel or when a remote client connection is needed there is a need to allows communication coming on to AxTraxNG on the PC Firewall, this article will explain you how to set Firewall rules on  Windows Defender.  This article only ...

• Does AxTraxNG support Interlocking

  Yes, AxTraxNG support Interlocking (Mantrap) option.  The interlocking can be Activated on any Access Control Panel with 2 or more doors, while interlocking is active only 1 of the interlocking doors can be open at the same Time.  To set an ...

• MD-N32 (V.1.2.4) Connecting with AxTraxNG version 27.5.6.6 and earlier (AC-215IP/225IP/425IP)

  Please note that this Technical-note only refer to AxTraxNG verison 27.5.6.6 while using an Access Control Panel equipped with MD-N32 (V 1.2.4) Summary: Since Rosslare Release Access control IP panels provided with MD-N32 version 1.2.4 those Control ...